Brother FAX-2000P User Manual
Page 153
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Specifications
Resolution
G3: 203 pels/inch x 98 lines/inch (8 pefs/mm x 3.85 lines/mm)
203 pels/inch x 196 lines/inch (8 pels/mm x 7.70 lines/mm)
G2; 203 pels/inch x 98 lines/inch (8 pels/mm x 3.85 lines/mm)
Modem
G3; V.29 (QAM), V.27ter (PhM) (9600/7200/4800/2400 bps) with fall
back function, and V.21 (FSK).
Dialing signal
10pps/20pps/DTMF
Power requirement
For USA
110 to 120Vac, 50/60HZ, Single phase
For the countries other than USA
Local AC voltage, 50/60Flz, Single phase
Standby
:
Approx. 25W (heater off)
Transmission ■ Approx.
SOW (heater off)
Reception : Approx. 475W (heater on)
Copy ; Approx. 500W (heater on)
Dimensions
Width ; 16.5"
Depth : 17.8“
Height ; 11.8"
(Dimensions of main unit excluding handset, handset cradle, and trays)
Weight
Approx. 51 lbs
Operating temperature
50°Fto95°F(10°Cto35°C)
Operating humidity
35% to 80%RH (with no visible condensation)
All specifications are subject to change without notice.
141