Sewing – Kenmore 385.16677 User Manual
Page 79
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PIN TUCKING
* Refer to page 58 (Narrow Hemming) for thread
tension balance adjustment.
(T) Pin tucking
Thread and Fabric
Fabric
Thread
Light to
Medium
Fabric
V
Needle thread on the
right
Synthetic
Silk
No, 60-80
No. 50-80
Upper looper thread
Lower looper thread
Synthetic
Silk
No, 60-100
No. 50-100 ^
Machine Setting
(T) Remove the needle on the left-hand side
@ Needle plate setting knob : P
(3) Upper knife : Down
Sewing
Turn off the power switch;
Remove themiedle on the left-hand side. - ^
Deactivate the upper knife.
Turn on the power switch, then serge the folded edge
while guiding 'alonlllhe jujdifc
(T) Folded edge::T|ii|g||g|!T"
(
2
) Guide line on the heedfe plate
@ Right needle position line on the presser foot
(4) Left needle position line on the presser foot
Right side of fabric
Open the fold flat and press the pin tucks to one side.
NOTE:
After you finish sewing, return the upper knife
to the original position.
Pin tucking
68