Kenmore 385.16677 - Manual (Page 37)

* Threading the Lower Looper
Open the looper cover and side cover.
Place the spool of thread on the right side spool pin
* The points to thread for lower looper are marked
in green.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thfiiiiilii|Rthe'rii|i^^
guide frotiiiliilo'ffdht: (A)
* If the thread: is coming outirofn the thread guide
groove, pi® the thread thrdd|h the thread guide
hole again as shown: (B)v h ii
(l) Thread guide
2. Pass the thread through the holes on the right side
of the thread guide plate as illustrated.
@ Thread guide plate
26