Attaching the presser foot, Removing the presser foot -1 – Kenmore 385.16677 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the Presser Foot
1. Turn off the power switch and unplug the
machine.
2. Raise the needle and the presser foot.
3. Press the lever located on the back of the foot
holder. The presser foot will drop off.
(T)
Needle
(2) Presser foot lifter
@ Foot holder
(Î) Lever
Attaching the Presser Foot
1. Turn off the power switch and unplug the
machine.
2. Place the presser foot so that the pin on the foot
lies just under the groove of the foot holder. t
3. Lower the foot holder to lock the. foot ihiotp.lace.
4. Raise the presser foot lifter toilheok that the
presser foot is secure.
MMSl'
(T) Groove
iSiiai:,
(D Pin
‘'tliiii,,
@ Lever
Acfjustmentjoi Foot Pressure
It is not necessary-to :ad|uS:t;:ihe presser foot’s
pressure for normal sewing.
When you serge heavy or lightweight fabrics, turn
the adjusting screw;
— clockwise for heavyweight fabric.
— counterclockwise for lightweight fabric.
* For normal sewing, set the adjusting screw so
that it sits 1 mm below the top of the machine.
(T) To decrease
@ To increase
@ Adjusting screw
(4) Top of the machine
i
14