Tayama TO-20002 - Manual (Page 15)

SAFETY PRECAUTIONS
* Read all the instructions - then save for future reference.
*Do not touch hot surfaces. Use handles or knobs.
*To protect against electrical shock do not immerse cord, plugs, or (state
specific part or parts in question)in water or other liquid.
*Do not operate and appliance with a damaged cord or plug or after the
appliance malfunctions or has been damaged in any manner .Return
appliance to the nearest authorized service facility for examination,
repair, or adjustment.
*The use of accessory attachments not recommended by the appliance
manufacturer may cause injuries.
*Do not place on or near a hot gas or electric burner, or in a heated oven.
*Extreme caution must be use when moving an appliance containing hot
oil or other hot liquids.
*Always attach plug to appliance first, then plug cord into the wall
outlet .to disconnect, turn any control to “off ”,then remove plug from
wall outlet.
*Do not use appliance for other than intended use.
* Always pull handle up to "off" position before unplugging oven.
* Do not let cord hang over edge of counter.
* Place oven securely in center of counter or work space.
* Always unplug oven before attempting to move it.
* Oven surfaces are hot - always supervise children while in the kitchen.
* Secure the
EZ COOK lid on the oven before turning on power.
* Always turn oven off before removing lid and always place lid on the
lid rack. Never set it down directly on the counter. Always leave at
least 2 inches between the oven lid and counter top or other surfaces.
NOTE！ WHEN HOT LID IS REMOVED FROM THE
BASE, IT SHOULD ALWAYS REST ON THE LID RACK
SUPPLIED WITH THE OVEN.
* Always unplug and cord the oven before cleaning.
* Use two hands when moving the oven.
* Do not allow the lid to get wet.
* WARNING: ALL GLASS SURFACES OF THE OVEN GET VERY
HOT. TOUCHING THESE SURFACES BEFORE OVEN COOLS
WILL CAUSE A BURN. DO NOT TOUCH ANY GLASS PART
OF THE OVEN UNTIL IT HAS COOLED.
*Ssve these instructions.
Page 15