Mercedes-Benz CLS-Class 2014 COMAND Manual - Manual (Page 78)

You can change the sequence of the way
points and the destination.
X To change the sequence: from the menu,
select Move Move by turning cVd the COMAND
controller and press W to confirm.
X
Turn cVd the COMAND controller and
move the way point or destination to the
desired position, then press W to confirm.
X To delete way points: from the menu,
select Delete Delete and press W to confirm.
Accepting way points for the route
X Select Start Start in the way point menu by
turning cVd the COMAND controller and
press W to confirm.
The route is calculated with the entered
way points.
i Continue Continue is displayed instead of Start Start
when Calculate Alternative Routes Calculate Alternative Routes
is activated in the navigation menu
(
Y
page 93).
i If a way point has been passed during
route guidance, the way point will be dis-
played in the way point menu with a green
arrow. Once the route has been recalcu-
lated, the way point is deleted from the way
point menu.
Searching for a gas station when the
fuel level is low
If the reserve fuel warning is displayed, you
will see the message: Reserve Fuel Reserve Fuel
Level. Do you want to start the Level. Do you want to start the
search//for surrounding gas sta‐ search//for surrounding gas sta‐
tions? tions? .
X Select Yes Yes or No No .
If you select Yes Yes , the gas station search
starts. When the search is complete, a list
of the gas stations available along the route
or in the vicinity is displayed.
If you select No No , the search is canceled.
X
Select a gas station and press W to con-
firm.
The address of the gas station is displayed.
X Confirm Start Start by pressing W.
The selected gas station is entered into
position 1 of the way points menu. Route
guidance begins.
If the way points menu already contains
four way points, a prompt will be displayed,
asking you whether you wish to enter the
gas station into position 1. If you select
Yes Yes , the gas station is transferred into the
list and way point 4 is deleted.
Entering a POI
Calling up the points of interest menu
Example: POI menu
POIs are predefined destinations within cat-
egories, e.g. a gas station in the AUTOMO‐ AUTOMO‐
TIVE TIVE category.
X To switch to navigation mode: press the
Ø button.
X To show the menu: press W the COMAND
controller.
X Select Destination Destination in the navigation sys-
tem menu bar by turning cVd the
COMAND controller and press W to con-
firm.
X Select From From POIs POIs and press W to confirm.
A menu appears.
76
Entering a POI
Navigat
ion