Onlin e an d int er net fu nct ions, Establishing/ending the connection – Mercedes-Benz CLS-Class 2014 COMAND Manual User Manual
Page 160

Your COMAND equipment
These operating instructions describe all the
standard and optional equipment for your
COMAND system, as available at the time of
going to print. Country-specific differences
are possible. Please note that your
COMAND system may not be equipped with
all the features described.
General notes
Conditions for access
To use COMAND Mercedes-Benz Apps and
Internet access, the following conditions
must be fulfilled:
R
mbrace is activated and operational
R
mbrace is activated for COMAND
Mercedes-Benz Apps and Internet access
Priority of connections: an emergency call
has the highest priority. When a service call,
e.g. a breakdown service call or the MB Info
Call, is active, an emergency call can still be
initiated.
A service call, on the other hand, has priority
over a current Internet connection. Therefore,
you cannot establish an Internet connection
during a service call.
i
The availability of individual COMAND
Mercedes-Benz Apps may vary depending
on the country.
i
The terms of use are shown when
COMAND is used for the first time and then
once a year thereafter. Only read and
accept the terms of use when the vehicle
is stationary.
i
Internet pages cannot be shown on the
driver's side while the vehicle is in motion.
Establishing/ending the connection
Establishing the connection
Preconditions for establishing a connection
can be found under "General notes"
(
Y
page 158).
X
Option 1: select the ® icon in the main
function bar by turning cVd the COMAND
controller and press W to confirm.
The carousel view appears.
X
Turn cVd or slide XVY the COMAND con-
troller until the
Mercedes-Benz Apps
Mercedes-Benz Apps
panel or a favorite is brought to the front, if
these have been previously created
(
Y
page 173).
X
Option 2: enter a web address
(
Y
page 168).
X
For both options, press W the COMAND
controller.
The Internet connection is established. An
active Internet connection is identified with
symbol :. The example shows the menu
158
Establishing/ending the connection
Onlin
e
an
d
Int
er
net
fu
nct
ions