At a glance, Character entry (telephony) – Mercedes-Benz CLS-Class 2014 COMAND Manual User Manual
Page 36
When playing using an iPod
®
, the bit rate
should also be at least 224 kbit/s.
For optimum playback quality:
X
Deactivate the “EQ” setting on the
iPod
®
.
Surround-sound playback does not func-
tion for mono signal sources, such as the
medium wave range (MW) in radio mode.
On some stereo recordings, the sound
characteristics may differ from conven-
tional stereo playback.
Character entry (telephony)
Example: entering characters
: *
To switch the character bar to upper-
case/lowercase letters
; p
To switch the character bar from
uppercase/lowercase letters to dig-
its
= B
To change the language of the char-
acter bar
? 2
To delete a character/an entry
The example describes how to enter the sur-
name “Schulz”.
X
Call up the input menu with data fields
(
Y
page 139).
X
Select
SS
and confirm W with the COMAND
controller.
SS
appears in the data field.
X
Select
cc
and confirm W with the COMAND
controller.
The letter
cc
is added to
SS
in the data field.
X
Repeat the process until the name has
been entered in full.
Other input menu functions:
R
Deleting a character/an entry
(
Y
page 35)
R
Switching between upper/lower-case let-
ters (
Y
page 35)
R
Changing the character set (
Y
page 35)
R
Moving the cursor to the next data field
(
Y
page 35)
X
To enter a phone number: select the dig-
its one by one in the corresponding data
field by turning cVd and sliding ZVÆ the
COMAND controller and press W to con-
firm.
Switching data fields
:
Cursor in the next data field
;
To store the entry
=
4 and 5 symbols to select a data field
In the input menu, if you want to enter a first
name after you have entered a surname, for
example, proceed as follows to switch
between the data fields:
Option 1
X
Select 4 or 5 in the character bar and
press W to confirm.
The input menu shows the data field
selected.
34
Character entry (telephony)
At
a
glance