Mercedes-Benz CLS-Class 2014 COMAND Manual - Manual (Page 253)

X To switch off the function in COMAND:
switch on the desired audio mode in
COMAND or show the menu in video DVD
mode.
X Select the menu item at the bottom left,
e.g. CD CD in audio CD mode, by sliding VÆ
and turning cVd the COMAND controller
and press W to confirm.
X Select Rear Audio/Video Off Rear Audio/Video Off _ and
press W the COMAND controller to con-
firm.
Selecting an active COMAND source
on the rear-compartment screen
Loading the active COMAND source
X Select COMAND COMAND using the 9=;
buttons on the remote control and press
9 to confirm.
The audio or video source selected in
COMAND is loaded in the Rear Seat Enter-
tainment System.
When the loading process is complete, the
audio or video source is set in the Rear Seat
Entertainment System.
If
Rear Audio/Video Off Rear Audio/Video Off is activated in
COMAND, the COMAND is off or there COMAND is off or there
is no active COMAND source is no active COMAND source message
appears.
Audio CD mode
X To select by skipping to a track: press
the = or ; button.
or
X Press the E or F button.
The skip forward function skips to the next
track.
If the elapsed track time has exceeded 8
seconds, the function skips back to the
beginning of the track.
If the elapsed track time is less than 8 sec-
onds, the function skips back to the begin-
ning of the previous track.
Additional setting option:
R Adjusting the sound settings (
Y
page 240)
Audio DVD mode
X To skip to the next/previous group:
press the : button on the remote
control.
X To select K L: highlight using the
= or ; button and press 9.
Additional setting option:
R Adjusting the sound settings (
Y
page 240)
i Information on groups can be found under
"Setting the audio format" (
Y
page 197).
MP3 mode
X
To select a track by skipping to a
track: press the = or ; button on
the remote control.
or
X Press the E or F button.
The skip forward function skips to the next
track.
If the elapsed track time has exceeded 8
seconds, the function skips back to the
beginning of the track.
If the elapsed track time is less than 8 sec-
onds, the function skips back to the begin-
ning of the previous track.
Operation with an active COMAND source
251
Rear
Se
at
En
tertain
men
tSys
tem
Z