Mercedes-Benz CLS-Class 2014 COMAND Manual - Manual (Page 242)

Basic functions
Using headphones
You can use the cordless headphones sup-
plied and/or up to two sets of corded head-
phones connected to the corresponding jack
of the rear-compartment screens
(
Y
page 235).
Information on the cordless headphones
(
Y
page 237).
Using the main loudspeakers
This function is available in conjunction with
COMAND.
You can use the vehicle loudspeakers to lis-
ten to a disc inserted in the rear-compartment
drive. To do so, at least one of the rear-com-
partment screens must be set to disc mode.
X
To set on COMAND: press the $ func-
tion button to switch on an audio mode.
X Select Audio Audio by sliding ZV the COMAND
controller and press W to confirm.
The Audio menu appears.
X Select Rear Rear by turning cVd the COMAND
controller and press W to confirm.
i The headphones' volume setting does not
affect the main loudspeakers.
Selecting sound settings
You can select the sound settings in the CD/
audio DVD/MP3, video DVD and AUX modes.
X Switch on an operating mode (e.g. audio
CD mode) (
Y
page 242).
X Select Treble Treble or Bass Bass using
the :=; buttons on the remote
control and press the 9 button to confirm.
An adjustment scale appears.
X Select a setting using the 9: but-
tons and press the 9 button to confirm.
Multiple users
Simultaneous use of the rear-compart-
ment disc drive
The two rear-compartment screens can be
operated almost entirely independently from
one another. However, there can be a conflict
in some menus if the two screens are used
simultaneously.
If the rear-compartment disc drive is being
used for both screens simultaneously, select-
ing certain menus or settings on one of the
screens also affects the other screen.
The following functions affect both screens:
R changing playback options
R selecting a track (from a track list or folder)
R using the play, pause and stop functions
R fast forwarding/rewinding or scrolling
R calling up the DVD menu and navigating
within it
R setting the language, subtitles and camera
angle
R calling up interactive DVD content
The following functions affect only one
screen:
R audio and video functions as well as picture
settings
R switching between full screen and the
menu
Switching between operating modes
When you exit an operating mode (e.g. audio
CD mode), the current setting is saved. If you
call up this operating mode again later, there
are two possibilities:
R the operating mode has been changed on
the other screen.
R the operating mode has not been changed.
In the first case, the operating mode appears
as it is on the other screen.
In the second case, the setting appears on the
screen as it was when you last exited the
operating mode.
240
Basic functions
Rear
Se
at
En
tertai
nme
nt
Sys
tem