Mercedes-Benz CLS-Class 2014 COMAND Manual - Manual (Page 182)

Selecting a station
Selects stations via the station search
function
X Press the E or F button.
or
X Turn cVd or slide XVY the COMAND con-
troller while the display/selection window
in the radio display is active.
Station search scans up or down and stops
at the next station found.
Selecting station via the station presets
X
Quick setting: press a number key, e.g.
l.
X Directly in the station presets: select
Presets Presets by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
or
X When the display/selection window is
active, press W the COMAND controller.
The station preset memory appears. The
# dot indicates under which preset the
currently selected station is stored.
X Select a station by turning cVd and press-
ing W to confirm or press a number key,
e.g. l.
Selecting stations by entering the fre-
quency manually
X Option 1: press the l button.
X Option 2: select Radio Radio in the radio display
by sliding VÆ and turning cVd the
COMAND controller and press W to con-
firm.
X Select Enter Frequency Enter Frequency and press W to
confirm.
Irrespective of the option chosen, an input
menu will appear.
X Enter a frequency using the number keys.
COMAND sets the frequency entered.
Waveband Frequency
AM (MF) 530 - 1700 kHz
FM (VHF) 87.7 - 107.9 MHz
WB (Weather Band) Weather report
channels
i You can only enter currently permitted
numbers.
i If you enter a frequency in the FM or AM
wavebands which is outside the frequency
range, COMAND sets the next lower fre-
quency.
Storing station
Storing station manually
There are ten presets available for the FM and
AM wavebands.
Example: station presets
X Quick save: press and hold a number key,
e.g. l, until you hear a tone.
The station is stored.
180
Radio mode
Audio