Mercedes-Benz CLS-Class 2014 COMAND Manual - Manual (Page 128)

This visibility is for restricted periods of
time on some mobile phones.
R Bluetooth ® device name
Every Bluetooth ® device has its own Blue-
tooth ® device name. This device name is
freely definable, but can be identical for all
devices from the same manufacturer. It is
therefore recommended that you change
this name so that you can easily recognize
your mobile phone (see the mobile phone
operating instructions).
i Not all mobile phones available on the
market are equally suitable. You can obtain
more detailed information about suitable
mobile phones and about connecting Blue-
tooth ® -capable mobile phones to
COMAND on the Internet at
http://www.mbusa-mobile.com. Or call
the Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
(1-800-367-6372) (for the USA) or Cus-
tomer Relations at 1-800-387-0100 (for
Canada).
i Some displays (e.g. the signal strength)
depend on the supported version of the
Hands-Free Profile.
Connecting a mobile phone
General information
Before using your mobile phone with
COMAND for the first time, you will need to:
R search for it (
Y
page 127) and then
R authorize (register) it (
Y
page 128).
When you authorize a new mobile phone, it is
connected automatically.
You can authorize up to 15 mobile phones.
If the mobile phone supports PBAP (Phone
Book Access Profile) and MAP (Message
Access Profile), the following contacts and
messages are downloaded into COMAND
when connecting:
R phone book
R call lists
R text messages
Further information on the conditions for con-
necting (
Y
page 125).
126 Telephony via the Bluetooth ® interface
Teleph
one