Mercedes-Benz CLS-Class 2014 COMAND Manual - Manual (Page 56)

This function allows you to adjust the air
cushions in the seat side bolsters.
X Select the seat (
Y
page 52).
X Select Seat Sides Seat Sides by turning cVd the
COMAND controller and press W to con-
firm.
A scale appears.
X Turn cVd or slide ZVÆ the COMAND con-
troller and press W to confirm.
X To exit the menu: press the k back
button.
Balance
The availability of this function depends on
the vehicle model series.
The Balance function controls the distribution
of heat on the seat backrest and cushion.
The Balance function influences the currently
set heating level of the seat heating; see the
separate vehicle Operator's Manual.
X Select the seat (
Y
page 52).
X Select Balance Balance by turning cVd the
COMAND controller and press W to con-
firm.
A scale appears and shows the current set-
ting. Positive values indicate the heat out-
put for the seat backrest, negative values
indicate the heat output for the seat cush-
ion. The intensity is indicated by an orange
bar in the stylized seat above the scale.
The values stand for:
R 00 - backrest and seat cushion are heated
equally to the maximum level
R 11 to 33 - the heat output to the seat cush-
ion is reduced in one-third increments
R -1 -1 to -3 -3 - the heat output to the backrest
is reduced in one-third increments
X Turn cVd or slide XVY the COMAND con-
troller and press W to confirm.
X
To exit the menu: press the k back
button.
Massage function
The availability of this function depends on
the type of seat and the vehicle model series.
Example display (M-Class or GL-Class)
X
Select the seat (
Y
page 52).
X Select Massage Massage by turning cVd the
COMAND controller and press W to con-
firm.
A list appears.
You can select different types of massage
function:
R 0: Off 0: Off
R 1: Slow and Gentle 1: Slow and Gentle
R 2: Slow and Vigorous 2: Slow and Vigorous
R 3: Fast and Gentle 3: Fast and Gentle
R 4: Fast and Vigorous 4: Fast and Vigorous
54
Seat functions
Vehicle
functions