Kontron CG1200 Carrier Grade Server - Manual (Page 51)

45
Kontron CG1200 Carrier Grade Server Installation and Maintenance Guide 45
1. Connect the SuperCap cable to the SuperCap module (Figure 34).
The module connector is keyed and the contacts face upwards.
Figure 34: Connecting the SuperCap Cable to the SuperCap Module
2. Unfasten the module retention screw from the mounting bracket on the chassis floor (Figure 35, “A”).
Move the power distribution board cables out of the way, if necessary.
Figure 35: Removing the Retention Screw from the SuperCap Bracket