Kontron CG1200 Carrier Grade Server - Manual (Page 40)

34
Kontron CG1200 Carrier Grade Server Installation and Maintenance Guide 34
4 Optional Component Installation Procedures
This chapter covers separately-orderable components that you may want to add or replace in your
Kontron CG1200 Carrier Grade Server. Most of these components can be ordered as accessories from
Kontron and some are from third party vendors. For more information about what is available from
Kontron, see the CG1200 Carrier Grade Server Configuration Guide. For a list of qualified third party
vendors, see the Tested Hardware and Operating System List (THOL). The latest version of the
Configuration Guide is located on the Kontron support website at
http://us.kontron.com/support/ (search
for CG1200, click on Product Downloads, then Ordering Guide). The latest version of the THOL is
located on the support website at
http://us.kontron.com/support (search for CG1200, click on Product
Downloads, then Compatibility Matrix).
4.1 Before You Begin
Before working with your server product, pay close attention to the safety instructions provided in this
manual. See Appendix A: Safety Information
” .
WARNING: Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives, boards, and
other parts. We recommend that you perform all procedures in this chapter only at an ESD workstation. If
one is not available, provide some ESD protection by wearing an antistatic wrist strap attached to chassis
ground (any unpainted metal surface) on your server when handling parts.
4.1.1 Tools and Supplies Needed
•
#1 and #2 Phillips (cross-point) screwdrivers (or interchangeable tip screwdriver with #1 and #2
Phillips bits)
•
Personal grounding device such as an anti-static wrist strap and a grounded conductive pad
4.1.2 System References
All references to left, right, front, top, and bottom assume that you are facing the front of the server, as it
would be positioned for normal operation.
4.1.3 Cable Routing Reference
It is important for cables to be connected correctly. See Figure 24 and Table 5 for cable routing and for
more detailed information, see the Kontron CG1200 Carrier Grade Server Technical Product
Specification.