Software support / hardware abstraction, Document and standards references, External industry standard documents – Kontron SMARC-sA3874i User Manual
Page 9: 2 software support / hardware abstraction, 3 document and standards references

9
www.kontron.com
User’s Guide
2.2 Software Support / Hardware Abstraction
The Kontron sA3874i Module is supported by Kontron BSPs (Board Support Package). The first sA3874i BSP targets
Linux support and is available under Kontron part number xxx-xxx-00. BSPs for other operating systems are
planned. Check with your Kontron contact for the latest BSPs.
This manual goes into a lot of detail on I/O particulars – information is provided on exactly how the various ULP-
COM edge fingers tie into the Texas Instruments ARM SoC and to other Module hardware. This is provided for
reference and context. Most of the I/O particulars are covered and abstracted in the BSP and it should generally
not be necessary for sA3874i users to deal with I/O at the register level.
2.3 Document and Standards References
2.3.1 External Industry Standard Documents
»
eMMC (Embedded Multi-Media Card)
the eMMC electrical standard is defined by JEDEC JESD84-B45 and the
mechanical standard by JESD84-C44
»
GbE MDI (Gigabit Ethernet Medium Dependent Interface)
defined by IEEE 802.3. The 1000Base-T
operation over copper twisted pair cabling is defined by IEEE 802.3ab
»
HDMI Specification
, Version 1.3a, November 10, 2006 © 2006 Hitachi and other companies
»
Version 2.1, January 2000,
Philips Semiconductor (now NXP)
»
I2S Bus Specification,
Feb. 1986 and Revised June 5, 1996, Philips Semiconductor (now NXP)
»
JTAG (Joint Test Action Group)
defined by IEEE 1149.1-2001 - IEEE Standard Test Access Port and
Boundary Scan Architecture
»
MXM3 Graphics Module Mobile PCI Express Module Electromechanical Specification, Version 3.0, Revision
1.1, © 2009 NVIDIA Corporation
»
PICMG
®
EEEP Embedded EEPROM Specification,
Rev. 1.0, August 2010
»
PCI Express Specifications
»
Serial ATA Revision 3.1
, July 18, 2011, Gold Revision, © Serial ATA International Organization
»
SD Specifications Part 1 Physical Layer Simplified Specification,
Version 3.01, May 18, 2010, © 2010 SD
Group and SD Card Association (Secure Digital)
»
SPDIF
(aka S/PDIF) (Sony Philips Digital Interface) - IEC 60958-3.
»
SPI Bus –
“Serial Peripheral Interface” – de-facto serial interface standard defined by Motorola. A good
description may be found on Wikipedia
»
USB Specifications