Kontron SMARC-sA3874i - Manual (Page 8)

8 www.kontron.com
User’s Guide
2 Introduction
The ULP-COM® (Ultra Low Power – Computer on Module) sA3874i is a versatile small form factor Computer-On-
Module that requires low power and provides high performance at low cost. The module connector has 314 edge
fingers that mate with a low profile 314 pin 0.5mm pitch right angle connector (this connector is sometimes
identified as an 321 pin connector, but 7 pins are lost to the key).
Featuring Texas Instruments ARM Cortex A8 microprocessor, Kontron’s ULP-COM sA3874i offers LVDS, Parallel LCD,
HDMI Display, Gigabit Ethernet, PCIe, SATA, USB, USB OTG, Camera support and graphics functions in a cost
effective, low power, miniature package. Kontron’s ULP-COM sA3874i thin and robust design makes it an ideal
building block for reliable system design.
Caution! The ULP-COM sA3874i module is ESD sensitive equipment. Users must observe precautions for handling
electrostatic discharge sensitive devices.
2.1 Feature Set Overview
» ULP-COM compliant in an 82mm x 50mm form factor.
» Texas Instrument single-core 1.0 GHz ARM Cortex A8 SoC.
» Up to 2GB of DDR3 SDRAM support.
» On-board NAND flash eMMC support up to 32GB.
» On-board Atheros (AR8031) GbE PHY.
» Single channel 18bit, 24bit (18 bit compatible) LVDS display panel support.
» HDMI output.
» GPIO support.
» SDIO support.
» I2S support.
» I2C support.
» One Parallel Camera interface.
» One PCIe port.
» USB Host and Client Support.
» Watch Dog Timer (WDT) support.
» UART support.
» CAN support.
» SATA support.