3 advanced pci/pnp settings, Advanced pci/pnp settings – Kontron COMe-cXLi2 User Manual
Page 88
Kontron COMe-cXLi2 User’s Guide
www.kontron.com
82
8.3.3
Advanced PCI/PnP Settings
Feature
Option
Description
Clear NVRAM
No
Yes
Clear NVRAM (None Volatile RAM)
during system boot
Plug & Play O/S
No
Yes
No: lets the BIOS configure all
the devices in the system
Yes: lets the OS configure PnP
devices not required for boot if
your system has a Plug and Play
OS
PCI Latency Timer
32
64
96
128
160
192
224
248
Set this value to allow the
Master Latency Timer to be
adjusted. This option sets the
latency of most PCI devices
PCI IDE Bus
master
Disabled
Enabled
If enabled improves the
performance of the IDE interface
for some operating systems (e.g.
DOS)
IRQ3
IRQ4
Available
Reserved
Reserved means that this
interrupt is a legacy IRQ (not
See also other documents in the category Kontron Hardware:
- CP3003-SA uEFI BIOS (72 pages)
- CP3003-SA (36 pages)
- CP3002 (38 pages)
- CP3002-RC uEFI (64 pages)
- CP-RIO3-05 (42 pages)
- CP3002-RC (30 pages)
- CP342 (52 pages)
- CP930 (46 pages)
- CP932 (52 pages)
- CP346 (72 pages)
- CP384 (66 pages)
- CP383 (74 pages)
- CP382 (58 pages)
- CP381 (60 pages)
- CP372 (64 pages)
- CP371 (60 pages)
- CP-RIO3-04S (38 pages)
- CP390 (36 pages)
- CPS3410 (9 pages)
- CPS3402 (9 pages)
- CPS3105 (9 pages)
- CPS3101 (9 pages)
- CPS3003-SA (19 pages)
- PB-SIO4 (34 pages)
- PB-SIO4A (34 pages)
- PB-DOUT8 (34 pages)
- VMOD-2 (82 pages)
- VSBC-32 (110 pages)
- VM42 (62 pages)
- Bootstrap Loader (24 pages)
- VMP1 with Netbootloader (120 pages)
- VMP1 (106 pages)
- NetBootLoader (86 pages)
- VMP2 (142 pages)
- VMP3 (154 pages)
- CP-RIO6-923 (32 pages)
- CP-RIO6-923-F (32 pages)
- CP-RIO6-001 (28 pages)
- CP-RIO6-001-HD-VGA (46 pages)
- CP-RIO6-M (20 pages)
- CP-RIO6-B (28 pages)
- CP6925 (42 pages)
- CP6002 uEFI BIOS (76 pages)
- CP6002 IPMI (40 pages)
- CP6002 (42 pages)