Kontron COMe-cXLi2 - Manual (Page 43)

Kontron COMe-cXLi2 User’s Guide
www.kontron.com
37
1024MB 4MB 254MB 352MB
1024MB 8MB 253MB 352MB
Note : When using 1 MByte of pre-allocated memory, operating systems
without active GMA or IEGD may have problems displaying a screen (e.g.
during a Windows XP installation).
VGA
The COMe-cXLi2 graphics subsystem integrated in the Intel® System Controller
Hub US15W does not support VGA output.
LVDS Flat Panel Interface (JILI)
The user interface for flat panels is the JUMPtec* Intelligent LVDS Interface
(JILI). The implementation of this subsystem complies with the COM Express®
specification. For additional implementation information, refer to the PICMG
COM Express® Design Guide on the PIGMG website.
SDVO Interface
The COMe-cXLi2 Serial Digital Video Output (SDVO) port is integrated on the
US15WPT system controller hub. The SDVO port has the following features:
» Shares pins with the PEG interface
» One SDVO port
» Drives a variety of SDVO devices (e.g., TV-Out Encoders, TMDS and LVDS
transmitters)
The implementation of this subsystem complies with the COM Express®
specification. For additional implementation information, refer to the PICMG
COM Express® Design Guide on the PICMG website.
4.2.7 Ethernet Interface
The Ethernet interface on the COMe-cXLi2 COM is the industrial temperature
version of the Intel® 82574 Gigabit Ethernet Controller. The GbE controller
is connected to the PCI Express Switch port #1. The controller supports a
10/100/1000 Base-T interface and it auto-negotiates the use of 10 Mbit/sec,
100 Mbit/sec or 1Gbit/sec connections.
The network interface operates at its lowest power (<1W) when GbE is fully
active. The interface supports functions such as WOL (WakeOnLAN) and PXE
(Preboot eXecution Environment) boot.