Dynojet 424xLC2: Installation Guide - Manual (Page 168)

A P P E N D I X C
Deck Relocation
Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
C-14
9 If not already removed, remove the three 3/8-16 x 1-inch button-head flange bolts
from the front drum guard.
10 If not already removed, remove the two 3/8-16 x 1.25-inch button-head flange
bolts from the side drum guards.
11 Gently place the deck on the deck braces making sure the deck lip is on top of the
drum guards.
12 Using the two 3/8-16 x 1.25-inch button-head flange bolts removed earlier, secure
the deck lip to the dyno.
13 Using the three 3/8-16 x 1-inch button-head flange bolts removed earlier, secure
the deck lip to the dyno.
Figure C-13: Placing the Deck on the Dyno
AD505
side drum
guard bolt
front drum
guard bolts
side drum
guard bolt
deck lip