Dynojet 424xLC2: Installation Guide - Manual (Page 130)

C H A P T E R 6
Loading the Vehicle
Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
6-4
9 Attach the tie-down straps.
Rear Wheel Drive
• Attach two tie-down straps from secure anchor points to the rear of the vehicle.
Attach additional tie-down straps from the rear of the vehicle as shown in
Figure 6-2.
• Attach two tie-down straps from secure anchor points to the front of the
vehicle.
Front Wheel Drive
• Attach two tie-down straps from secure anchor points to the rear of the vehicle.
• Attach two tie-down straps from secure anchor points to the front of the
vehicle. Attach additional tie-down straps across the front of the vehicle to
form a crisscross.
With front wheel drive vehicles, always use longitudinal and cross straps
at the front of the vehicle.
Four Wheel (All-Wheel) Drive
• Attach two tie-down straps from secure anchor points to the rear of the vehicle.
Attach additional tie-down straps across the rear of the vehicle to form a
crisscross.
• Attach two tie-down straps from secure anchor points to the front of the
vehicle. Attach additional tie-down straps across the front of the vehicle to
form a crisscross.
With four wheel drive vehicles, always use longitudinal and cross straps
at the front of the vehicle.
Figure 6-2: Attach the Tie-down Straps
rear wheel drive front wheel drive four wheel drive