When autofocus fails (manual focusing), Manual focusing, Set the lens focus mode switch to Page 64: Focus on the subject, When autofocus fails, Manual focusing)
Page 64: Focus on the subject, When autofocus fails, Manual focusing)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When Autofocus Fails (Manual Focusing)
Autofocus can fail to achieve focus (the focus confirmation light <•>
blinks) with certain subjects such as the following:
(a) Low-contrast subjects (blue sky, solid-color walls, etc.).
(b) Subjects in low light.
(c) Extremely backlit and reflective subjects (car with a reflective body,
etc.).
(d) Overlapping near and far objects (animal in a cage, etc.).
In such cases, do one of the following:
1. Focus an object at the same distance as the subject and lock the
focus before recomposing.
2. Set the lens focus mode switch to
Manual Focusing
Focusing ring
Set the lens focus mode switch to
Focus on the subject.
o
Focus by turning the lens focusing ring
until the subject is in focus in the
viewfinder.
© If you press the shutter button halfway during manual focusing, the active
AF point and the focus confirmation light <•> in the viewfinder will light
when focus is achieved.
© If focus cannot be achieved with an external Speedlite’s AF-assist beam,
select the center AF point. An off-center AF point may not be able to
achieve focus.
#
#
64