Canon EOS 300 D - Manual (Page 39)

D Fully Automatic Shooting
Shoot.
o Compose the shot and press the
shutter button fully.
k The captured image will be displayed
for about 2 sec. on the LCD monitor
(US»).
41
Q While focusing with , do not touch the focusing ring at the front of
the lens.
© If you want to zoom, do it before focusing. Turning the zoom ring after
achieving focus may throw off the focus.
© When the CF card becomes full, the CF Full warning
“ F u l l
if” will
appear on the LCD panel and shooting will be disabled. Replace the CF
card with one that is not full.
# If something obstructed the built-in flash from popping up,
will blink on the LCD panel. Fix this by setting the power switch to off
and on.
Using a non-Canon EF lens with an EOS camera may not result in
proper camera or lens operation.
m
A
W
When focus is achieved, the autofocus and auto exposure setting will
also be locked.
© If the focus confirmation light <•> blinks, the picture cannot be taken.
(P-64)
© Out of the seven AF points, the one covering the closest subject is
selected automatically to achieve focus.
# The dot in multiple AF points may flash in red. This indicates that focus
has been achieved by all those AF points.
© In the Basic Zone modes (except <*SA>, <‘^> and ), the built-in
flash will pop up and fire automatically in low-light or backlit conditions.
To retract the flash, push it back down.
@ The focus-confirmation beeper can be silenced with the menu’s [Beep]
setting (D).
39