Using a household power supply l, Connect the dc coupler, Connect the power cord – Canon EOS 300 D User Manual
Page 22: Place the cord in the groove, Insert the dc coupler into the camera, Using a household power supply
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using a Household Power Supply
l
With AC Adapter Kit ACK-E2 (optional), you can connect the camera to
a household power outlet and not worry about the battery becoming
exhausted.
Connect the DC Coupler.
© Connect the DC Coupler’s plug to the
AC adapter’s socket.
Connect the power cord.
© Connect the power cord to the AC
adapter.
o Plug the cord into a power outlet.
• When you are finished, remove the
plug from the power outlet.
Place the cord in the groove.
Q Carefully insert the cord into the
groove without damaging it.
Insert the DC coupler into the
camera.
• Open the battery compartment cover
and open the DC Coupler cord notch
cover.
0 Insert the DC Coupler until the lock
position and put the cord through the
notch.
© Close the cover.
Do not connect or disconnect the power cord while the camera's Power
switch is set to
2 2