Stopping the printing – Canon EOS 300 D User Manual
Page 110
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Printing
Stopping the Printing
— ■■■■■■■■■■■■I
While [Stop] is displayed on the
LCD monitor, press < © >.
►
The printing will stop.
► If the confirmation dialog appears,
press the <◄►> keys to
[OK],
then
press < © >.
_4l When Stopping the Printing
With a card photo printer:
If only one print is being printed, you cannot stop the printing. If multiple
prints are being printed, the printing will stop after the current print is
finished printing.
With a BJ printer:
The printing will stop and the paper being printed will be discharged.
Resolving Printing Errors
If an error occurs during printing, an error message will appear on the LCD
monitor.
© If [Resume] is displayed, correct the error, then select [Resume] and
press < © > . After you press <©> and “Stop printing?” appears, select
[Cancel] and press <©> . The printing will resume. With certain
printers, the printing may resume automatically.
© If only [Stop] is displayed, press <©>. After correcting the problem,
start over again to print.
108