Installing and removing the cf card, Installing a cf card, Open the cover – Canon EOS 300 D User Manual
Page 24: Insert the cf card, Close the cover
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing and Removing the CF Card
The captured image will be recorded onto the CF card (optional).
Either a Type I or Type II CF card can be inserted into the camera.
Installing a CF Card
mark Label side
[ W
-•))
□
rAmi\
ML
4^
Open the cover.
Q
Slide the cover in the direction shown
by the arrow, and open it.
Insert the CF card.
© Using CF cards made by Canon is
recommended.
• With the CF card label side (the side
with the printed ◄ mark) facing toward
the rear of the camera, slide the card
in the direction of the ◄ mark, into the
slot.
►
The Eject button pops out.
Close the cover.
© Close the cover and slide it in the
direction shown by the arrow until it
clicks shut.
►
When you set the Power switch to
will be displayed on the LCD panel.
Number of remaining shots
j|j
The number of remaining shots depends on the remaining capacity of the
CF card and the ISO speed setting.
24