Shooting – Canon EOS 300 D User Manual
Page 127
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting Guide
Shooting
“No images can be shot or recorded.”
©The CF card is not properly loaded.
Load the CF card properly, (p.24)
©The CF card is full.
►
Use a new CF card or erase unnecessary images, (p.24, 95)
O The battery is exhausted.
►
Recharge the battery. (p.18)
O You did not focus well. (The focus confirmation light in the viewfinder
blinked.)
k Press the shutter button halfway and focus the subject. If you still cannot
focus properly, focus manually, (p.26, 64)
“The LCD monitor does not display a clear image.”
©The LCD monitor screen is dirty.
k Use a soft cloth to clean the screen.
©The LCD’s service life has expired.
►
Consult your nearest customer service center or dealer.
“The image is out of focus.”
©The lens focus mode switch is set to
►
Set the lens focus mode switch to
O Camera shake occured when you pressed the shutter button.
k To prevent camera shake, hold the camera still and press the shutter button
gently, (p.26, 36)
“The CF card cannot be used.”
©
[ E r r
**] is displayed on the LCD panel.
^lfitis[Frr cF], see page 98.
k
If it is
[ E r r 0 5 ] ,
see page 127.
• You are using a non-Canon CF card.
►
Using Canon CF cards is recommended, (p.2, 129)
“The message “r
bE ” appears on the LCD panel.”
©The date/time battery is exhausted.
►
Replace the battery with a new one. (p.33)
125