Select [auto rotate, Set the auto rotate setting, Take a vertical shot – Canon EOS 300 D User Manual

Page 59: Playback the image, Menu setting auto rotation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MENU

Setting Auto Rotation

Vertical shots can be rotated automatically so that they are displayed

upright during playback.

Auto rotation will work only with vertical images captured while

[Auto rotate] was [On]. It will not work with vertical images
captured while [Auto rotate] was [Off].

Select [Auto rotate].

• Select the tab.

[Auto rotate], then press < ©>.

Set the Auto rotate setting.

• Press the

keys to select [On],

then press < ©>.

Take a vertical shot.

• For the image review right after image

capture, the image will not be
displayed vertically on the LCD

monitor.

Playback the image.

► The vertical shot will be displayed

vertically as shown on the left.

If a vertical image is taken while the camera is pointed up or down, the

image might not rotate automatically for playback.

When you change the camera’s orientation between horizontal and
vertical, the camera orientation sensor will make a small sound. This is not
a defect.