Mounting and detaching a lens, Mounting a lens, Remove the caps – Canon EOS 300 D User Manual
Page 23: Attach the lens, On the lens, set the focus mode, Switch to
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mounting and Detaching a Lens
Mounting a Lens
EF-S Lens mo
r ---------------------
{ -
7—7
unt index
EF Lens mount index
3
Remove the caps.
• Remove the rear lens cap and the
body cap by turning them as shown by
the arrow.
Attach the lens.
• Align the EF-S lens with the camera’s
white EF-S lens mount index and turn
the lens as shown by the arrow until it
clicks in place.
© When attaching a lens other than an
EF-S lens, align the lens with the red
EF lens index mark.
On the lens, set the focus mode
switch to
• If the focus mode switch is set to
autofocus will not operate.
^ Remove the front lens cap.
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
o Turn the lens until it stops, then detach
it.
O
The EF-S lens is dedicated to this camera. It cannot be attached to
other EOS cameras.
23