Installing and removing the battery, Installing the battery, Open the battery compartment – Canon EOS 300 D User Manual
Page 20: Cover, Insert the battery into the camera, Close the cover, Battery level icons, Open the battery compartment cover
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing and Removing the Battery
Installing the Battery
Load a fully charged BP-511 battery pack into the camera.
Open the battery compartment
cover.
• Slide the lever in the direction shown
by the arrow in the diagram, and open
the cover.
Insert the battery into the camera.
@ Point the battery contacts downward.
© Insert the battery pack until it locks into
place.
Close the cover.
© Press the cover closed until it clicks
shut.
|] Battery Pack BP-512 can also be used.
Battery Level Icons
The level of charge remaining is shown in three stages when the Power
switch is set to
L
M L
ifwl ; Charge is sufficient.
: Charge is low.
-tb;: Battery pack must be recharged.
2 0