Replacing the date/time battery, Set the power switch to < off, Open the cover and remove the battery – Canon EOS 300 D User Manual

Page 33: Take out the battery holder, Replace the battery in the battery holder, Close the cover, Replacing the date/time, Battery

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Replacing the Date/Time Battery

The date/time battery maintains the camera’s date and time. The

battery’s service life is about 5 years. When the date/time battery’s

power is low, T

bC” will appear on the LCD panel. Replace the battery

with a new CR2016 lithium battery as described below.
The date/time setting will also be reset, so you must set the

correct date/time.

Set the Power switch to < OFF >.

Open the cover and remove the

battery.

Take out the battery holder.

Replace the battery in the battery

holder.

^ is correct.

Close the cover.

For the date/time battery, be sure to use a CR2016 lithium battery.