Lcd monitor, Select [clear all camera settings, Clear the settings – Canon EOS 300 D User Manual
Page 31: Reverting to the default settings
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Menu Operations
LCD Monitor
The color LCD monitor on the back of the camera enables you to
review and select recorded images and set various menu settings.
Q The LCD monitor cannot be used as a viewfinder to shoot.
© The LCD monitor’s brightness can be adjusted with the menu’s [LCD
Brightness] setting (?T1).
Reverting to the Default Settings
Clear all camera settings
Firmware Ver. 1.0.
S'
»»V--
V
' fft-.'.
Select [Clear all camera settings].
• Select the [?T2] tab.
• Press the
all camera settings], then press
<(R)>.
Shooting Settings
Clear the settings.
© Press the <►> key to select [OK], then
press <0>.The camera settings will
then be reset to the default settings.
k The camera’s default settings will be as
shown below.
Image Recording Settings
AF point selection
Automatic
Drive mode
Single
Exposure compensation
0 (Zero)
AEB
Canceled
Quality
LM (Large/Fine)
ISO speed
100
White balance
mm /Auto)
WB-BKT
Canceled
Parameters
Parameter 1
Auto rotate
On
File numbering
Continuous
31