Dell PowerEdge RAID Controller 6i - Manual (Page 110)

110
Configuring and Managing RAID
Restoring Factory Default Settings
You can use the Ctrl Mgmt menu screen to restore the default settings for
the options in the Settings box. The settings are Enable Controller BIOS,
Enable Alarm, and Enable BIOS Stop on Error. Perform the following steps
to restore default settings.
1 Press to access the Ctrl Mgmt menu screen.
2 Press to move the cursor to the Settings box.
3 Use the spacebar to deselect the settings for the options in the Settings
box.
4 Press to move the cursor to the Factory Default box, and press the
, , or the spacebar.
A dialog box displays for you to confirm your choice.
5 Select and press .
The defaults are automatically selected for the controller settings and are
displayed in Settings.
Dell_PERC6.1_UG.book Page 110 Wednesday, April 15, 2009 4:18 PM