Dell PowerEdge RAID Controller 6i - Manual (Page 45)

Installing and Configuring Hardware
45
Figure 4-4. Connecting Cables to the Controller
11 Replace the cover of the system. For more information on closing the
system, see your system’s Hardware Owner’s Manual.
12 Reconnect the power cables(s) and network cables, and turn on the system.
Installing the Transportable Battery Backup
Unit (TBBU) for PERC 6/E
This section describes the installation of the transportable battery backup
unit (TBBU) on the PERC 6/E.
CAUTION:
The following procedure must be performed at an Electrostatic
Discharge (ESD)-safe workstation to meet the requirements of EIA-625 -
"Requirements For Handling Electrostatic Discharge Sensitive Devices."
The following procedure must be performed following the IPC-A-610 latest
revision ESD recommended practices.
1 cable 3 PERC 6/i adapter
2 connectory 4 memory module
3
1
2
Dell_PERC6.1_UG.book Page 45 Wednesday, April 15, 2009 4:18 PM