Dell PowerEdge RAID Controller 6i - Manual (Page 76)

76
Installing the Drivers
Installing or Updating the NetWare Driver in an Existing NetWare
System
Perform the following steps to add the Novell NetWare driver to an existing
installation:
1 At the root prompt, type hdetect and press .
The Configuration Options screen is displayed.
2 From the screen that displays, go to the Storage Adapter screen to install
the MegaRAID SAS driver.
3 Delete any existing RAID adapter listings.
4 Press to add unlisted drivers.
5 Press again.
A path is displayed.
6 Press .
7 Insert the driver diskette into the diskette drive, and press .
The system finds the .HAM driver.
8 Press .
9 Select the Driver Summary screen, and press .
10 Continue the Novell NetWare installation procedure.
Dell_PERC6.1_UG.book Page 76 Wednesday, April 15, 2009 4:18 PM