Dell PowerEdge M520 (for PE VRTX) - Manual (Page 82)

Error Code Message Information
damage to the processor or other electronic components in side the
system.
Action
1. Turn system off and remove input power for one minute.
2. Reapply input power and turn system on.
3. Ensure the processor is seated correctly.
4. If the issue persists, see
Getting Help .
CPU0203
Message CPU < number > < name > voltage is greater than the upper critical
threshold.
LCD Message CPU < number > < name > voltage is outside of range. Re-seat CPU.
Details High voltages may be the result of problem with the voltage regulator
or a problem with the processor. Elevated voltages may result in
damage to the processor or other system electrical components. The
system may power down.
Action
1. Turn system off and remove input power for one minute.
2. Reapply input power and turn system on.
3. Ensure the processor is seated correctly.
4. If the issue persists, see
Getting Help .
CPU0204
Message CPU < number > < name > voltage is outside of range.
LCD Message CPU < number > < name > voltage is outside of range. Re-seat CPU.
Details Voltages outside the allowable range may damage electrical
components or may cause the system to shutdown.
Action
1. Turn system off and remove input power for one minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn system on.
4. If the issue persists, see
Getting Help .
CPU0700
Message CPU < number > initialization error detected.
LCD Message CPU < number > initialization error detected. Power cycle system.
Details System BIOS was unable to initialize the processor.
Action
1. Turn system off and remove input power for one minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn system on.
82