Dell PowerEdge M520 (for PE VRTX) - Manual (Page 130)

Error Code Message Information
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help .
VLT0207
Message The memory module < number > < name > voltage is less than the lower
critical threshold.
LCD Message Memory module < number > < name > voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help .
VLT0208
Message The memory module < number > < name > voltage is greater than the
upper warning threshold.
LCD Message Memory module < number > < name > voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help .
VLT0209
Message The memory module < number > < name > voltage is greater than the
upper critical threshold.
LCD Message Memory module < number > < name > voltage is outside of range.
130