Dell PowerEdge M520 (for PE VRTX) - Manual (Page 104)

Error Code Message Information
PST0132
Message CMOS failed.
LCD Message CMOS failed. Power cycle system.
Details System BIOS detected a failure with CMOS memory during system
POST.
Action Check system event log for CMOS battery exceptions. Remove and
reapply input power. If the issue persists, see
Getting Help .
PST0133
Message DMA controller failed.
LCD Message DMA controller failed. Power cycle system.
Details System BIOS detected a failure with the DMA controller during
system POST.
Action Remove and reapply input power.
PST0134
Message Interrupt controller failed.
LCD Message Interrupt controller failed. Power cycle system.
Details System BIOS detected a failure with the interrupt controller during
system POST.
Action Remove and reapply input power. If the issue persists, see Getting
Help .
PST0135
Message Timer refresh failed.
LCD Message Timer refresh failed. Power cycle system..
Details System BIOS detected a timer refresh failure during system POST.
Action Remove and reapply input power. If the issue persists, see Getting
Help .
PST0136
Message Programmable interval timer error.
LCD Message Programmable interval timer error. Power cycle system.
Details System BIOS detected an failure with the programmable interval
timer during POST.
Action Remove and reapply input power. If the issue persists, see Getting
Help .
PST0137
Message Parity error.
LCD Message Parity error. Power cycle system.
104