Dell PowerEdge M520 (for PE VRTX) User Manual
Page 80
Error Code
Message Information
Action
1. Turn system off and remove input power for one minute.
Reapply input power and turn system on.
2. Make sure the processor is seated correctly.
3. If the issue persists, see
CPU0008
Message
CPU <
number
> is disabled.
Details
System is unable to boot or may run in a degraded state.
Action
If unexpected, check presence, and system setup (BIOS)
configuration.
CPU0010
Message
CPU <
number
> is throttled.
Details
The CPU is throttled due to thermal or power conditions.
Action
Review system logs for power or thermal exceptions.
CPU0023
Message
CPU <
number
> is absent.
LCD Message
CPU <
number
> is absent. Check CPU.
Action
Verify processor installation. If present, re-seat the processor.
CPU0100
Message
CPU <
number
> temperature is less than the lower warning threshold.
Details
System performance may be degraded.
Action
Check system operating environment.
CPU0101
Message
CPU <
number
> temperature is less than the lower critical threshold.
LCD Message
CPU <
number
> temperature is outside of range.
Details
System performance may be degraded.
Action
Check system operating environment, fans, and heat-sinks.
CPU0102
Message
CPU <
number
> temperature is greater than the upper warning
threshold.
Details
System performance may be degraded.
Action
Check system operating environment, fans, and heat-sinks.
CPU0103
Message
CPU <
number
> temperature is greater than the upper critical
threshold.
80