Dell Broadcom NetXtreme Family of Adapters - Manual (Page 125)

Using Broadcom Advanced Control Suite 4: Broadcom NetXtreme BCM57XX User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtreme/English/bacs.htm[9/5/2014 3:32:16 PM]
A count of frames that were successfully received and are directed to an active nonbroadcast group address. This does not include
frames received with frame-too-long, FCS, length, or alignment errors, nor frames lost because of internal MAC sublayer errors. This
counter is incremented as indicated by the Receive OK status.
Broadcast Frames Rx
A count of frames that were successfully received and are directed to a broadcast group address. This count does not include frames
received with frame-too-long, FCS, length, or alignment errors, nor frames lost because of internal MAC sublayer errors. This counter
is incremented as indicated by the Receive OK status.
Frames Rx with CRC Error
The number of frames received with CRC errors.
Initiator Login Statistics
iSCSI login enables a connection for iSCSI use between the initiator and the target and is used to authenticate parties, negotiate the
session's parameters, open security association protocol, and mark the connection as belonging to an iSCSI session.
Login Accept Responses
The number of login requests accepted by the target.
Login other failed Responses
The number of login requests that were not accepted by the target.
Login Redirect Responses
The number of responses that required further action by the initiator.
Login Authentication Failed Responses
The number of login requests that failed due to party authentication failure.
Login target authentication failure
The number of instances where the login could not authenticate the target.
Login target negotiation failure
The number of instances where the login could not negotiate the sessions parameters.
Normal logout command PDU
The number of normal logout commands issued by the initiator to remove a connection from a session or to close a session.
Other logout command PDU
The number of logout commands issued by the initiator for reasons other than to remove a connection from a session or to close a
session.
Local Initiator login failures
The number of login failures likely caused by the initiator.
Initiator Instance Statistics
The statistics in this area pertain to all sessions.
Session digest errors
The number of sessions with errors due to an invalid payload or header.
Session connection timeout error
The number of sessions that were terminated due to any of the many timeout errors.