Dell Broadcom NetXtreme Family of Adapters - Manual (Page 132)

Using Broadcom Advanced Control Suite 4: Broadcom NetXtreme BCM57XX User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtreme/English/bacs.htm[9/5/2014 3:32:16 PM]
4. Select the type of team you want to create.
5. Select Enable Hyper-V Mode if you want to enable Windows virtualization services. See "Microsoft Virtualization with Hyper-
V" in the Troubleshooting topic in the NetXtreme II Network Adapter User Guide for more information about this feature.
6. If the team type is an SLB type team, click Next. If the team type is not an SLB type team, then a dialog box appears. Verify
that the network switch connected to the team members is configured correctly for the team type, click OK, and continue.
NOTE: NetXtreme II network adapters with iSCSI enabled is supported only in an SLB team type. To continue with the
creation of non-SLB team types, first disable iSCSI by deselecting iSCSI Offload Engine from the Resource Reservations
area of the Configurations tab.