Dell Broadcom NetXtreme Family of Adapters User Manual
Page 97
Broadcom Gigabit Ethernet Teaming Services: Broadcom NetXtreme BCM57XX User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtreme/English/teamsvcs.htm[9/5/2014 3:32:13 PM]
management interface.
device instance.
3
Unable to create symbolic link
for the management interface.
Another driver has created a
conflicting device name.
Unload the conflicting device driver that uses the
name Blf.
4
Broadcom Advanced Server
Program Driver has started.
Another driver has created a
conflicting device name.
Informational message only. No action is
required.
5
Broadcom Advanced Server
Program Driver has stopped.
The driver has stopped.
Informational message only. No action is
required.
6
Could not allocate memory for
internal data structures.
The driver cannot allocate
memory from the operating
system.
Close running applications to free memory
7
Could not bind to adapter.
The driver could not open
one of the team physical
adapters.
Unload and reload the physical adapter driver,
install an updated physical adapter driver, or
replace the physical adapter.
8
Successfully bind to adapter.
The driver successfully
opened the physical
adapter.
Informational message only. No action is
required.
9
Network adapter is disconnected.
The physical adapter is not
connected to the network (it
has not established link).
Check that the network cable is connected, verify
that the network cable is the right type, and
verify that the link partner (switch or hub) is
working correctly.
10
Network adapter is connected.
The physical adapter is
connected to the network (it
has established link).
Informational message only. No action is
required.
11
Broadcom Advanced Program
Features Driver is not designed
to run on this version of
Operating System.
The driver does not support
the operating system on
which it is installed.
Consult the driver release notes and install the
driver on a supported operating system or update
the driver.
12
Hot-standby adapter is selected
as the primary adapter for a
team without a load balancing
adapter.
A standby adapter has been
activated.
Replace the failed physical adapter.
13
Network adapter does not
support Advanced Failover.
The physical adapter does
not support the Broadcom
NIC Extension (NICE).
Replace the adapter with one that does support
NICE.
14
Network adapter is enabled via
management interface.
The driver has successfully
enabled a physical adapter
through the management
interface.
Informational message only. No action is
required.
15
Network adapter is disabled via
management interface.
The driver has successfully
disabled a physical adapter
through the management
interface.
Informational message only. No action is
required.
16
Network adapter is activated and
is participating in network traffic.
A physical adapter has been
added to or activated in a
team.
Informational message only. No action is
required.
17
Network adapter is de-activated
and is no longer participating in
network traffic.
The driver does not
recognize the installed
adapter.
Informational message only. No action is
required.