beautypg.com

Working inside your computer, Safety first — for you and your computer, Overview – Dell OptiPlex G1 User Manual

Page 52: Before you begin

background image

Working Inside Your Computer: Dell OptiPlex GX1 Low-Profile Managed PC Systems

file:///C|/infodev/2013/eDoc/OpGX1/SQRG/computer.htm[2/21/2013 11:53:01 AM]

Back to Contents Page

Working Inside Your Computer: Dell™ OptiPlex™ GX1 Low-Profile
Managed PC Systems

Overview

Replacing the Computer Cover

Before You Begin

Inside Your Computer

Removing the Computer Cover

Removing and Replacing the Expansion-Card
Cage

Overview

Your Dell computer system supports a variety of internal options that expand system capabilities. This
section prepares you to install options inside the computer. It describes how to remove and replace the
computer cover and expansion-card cage. It also familiarizes you with the internal components you may
handle if you install Dell hardware options.

Before You Begin

To make working inside your computer easier, make sure you have adequate lighting and a clean work
space. If you temporarily disconnect cables or remove expansion cards, note the position of the connectors
and slots so that you can reassemble the system correctly.

You will use the information in this section every time you install a hardware option inside your computer.
Read this section carefully, because the information is not repeated in detail elsewhere.

Safety First — For You and Your Computer

Working inside your computer is safe—if you observe the following precautions.

CAUTION FOR YOUR PERSONAL SAFETY AND PROTECTION OF YOUR EQUIPMENT

Before starting to work on your computer, perform the following steps in the sequence indicated:

1. Touch an unpainted metal surface on the computer chassis, such as the power supply, before touching

anything inside your computer.

While you work, periodically touch an unpainted metal surface on the computer chassis to dissipate
any static electricity that might harm internal components. Also avoid touching components or contacts
on a card and avoid touching pins on a chip.

2. Turn off your computer and all peripherals.

3. Disconnect your computer and peripherals from their AC power sources. Also, disconnect any

telephone or telecommunication lines from the computer. Doing so reduces the potential for personal