Dell 3130cn Color Laser Printer - Manual (Page 266)

9300
9300K
This option is available only for color printing and when entry data is RGB data.
-Cb=cyan-low:cyan-middle:cyan-high:magenta-low:magenta-middle:magenta-high:yellow-low:yellow -
middle:yellow high:black -low:black-middle:black-high
Specifies adjustment value for color balance of each color/density.
Available adjustment values are as follows.
+3
Dark 3
+2
Dark 2
+1
Dark 1
0
Normal
-1
Light 1
-2
Light 2
-3
Light 3
-Cb
Option value must be specified in the following order:
Cyan low density, Cyan medium density, Cyan high density, Magenta low density, Magenta medium density,
Magenta high density, Yellow low density, Yellow medium density, Yellow high density, Black low density,
Black medium density, Black high density
If no value is specified, it is treated as "0"(Normal).
For example, if you want to specify "Light 2" for Cyan medium density, "Dark 3" for Yellow high density, and
"Dark 2" for Black low density, it can be specified using either of the following:
-Cb=0:-2:0:0:0:0:0:0:+3:+2:0:0
-Cb=:-2:::::::+3:+2::
-Hld=PrintType:UserID:Password:DocumentName
Secure Print
PrintType
store
Secure Print/Store Print
proof
Proof Print
UserID
Up to eight single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A":" (colon).
Password
Up to 12 single-byte characters from 0x30 to 0x39 (numeric characters).
DocumentName
Up to 12 single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A ":" (colon).
Secure Print