Dell 3130cn Color Laser Printer - Manual (Page 129)

Gateway Address Sets the gateway address.
IPsec* 1 Disables IPsec.
*
1
Only displayed when an optional network protocol adapter is installed and IPsec is enabled.
Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and then on again.
Values:
LPD
Enable* Enables the LPD port.
Disable Disables the LPD port.
Port9100
Enable* Enables the Port9100 port.
Disable Disables the Port9100 port.
IPP*1
Enable* Enables the IPP port.
Disable Disables the IPP port.
SMB TCP/IP*1
Enable* Uses TCP/IP for SMB.
Disable Does not use TCP/IP for SMB.
SMB NetBEUI*1
Enable* Uses NetBEUI for SMB.
Disable Does not use Net BEUI for SMB.
NetWare*
1
NetWare IP
Enable* Uses IP for NetWare.
Disable Does not use IP for NetWare.
NetWare
IPX
Enable* Uses IPX for NetWare.
Disable Does not use IPX for NetWare.
WSD
Enable* Enables the WSD port.
Disable Disables the WSD port.
SNMP
SNMP UDP
Enable* Enables the UDP.
Disable Disables the UDP.
SNMP
IPX*
1
Enable* Enables the IPX.
Disable Disables the IPX.
E-Mail Alert
Enable* Enables the Email Alerts feature.
Disable Disables the Email Alerts feature.
EWS
Enable*
Enables an access to Dell Printer Configuration Web Tool embedded in the
printer.
Disable
Disables an access to Dell Printer Configuration Web Tool embedded in the
printer.
AppleTalk*
1
Enable* Enables the AppleTalk.
Disable Disables the AppleTalk.
Bonjour(mDNS)* 1
Enable* Enables the Bonjour(mDNS).
Disable Disables the Bonjour(mDNS).
Telnet
Enable* Enables the Telnet.
Disable Disables the Telnet.
HTTP-SSL/TLS
Enable Enables the HTTP-SSL/TLS.
Disable* Disables the HTTP-SSL/TLS.
1