Loading print media, Standard and optional trays, Capacity – Dell 3130cn Color Laser Printer User Manual

Page 99: Print media dimensions

Loading Print Media

Standard and Optional Trays

Loading print media properly helps prevent jams and ensures trouble-free printing.

Before loading print media, identify the recommended print side of the print media. This information is usually on the

print media package.

NOTE:

After loading paper in the tray, specify the same paper type on the operator panel.

Standard and Optional Trays

Capacity

The tray 1 can hold:

250 sheets of the standard paper.

The optional 550 sheet feeder can hold:

550 sheets of the standard paper.

Print Media Dimensions

The standard and optional trays accept print media within the following dimensions:

Width - 148 mm (5.83 inches) to 215.9 mm (8.5 inches)

Length - 210 mm (8.27 inches) to 355.6 mm (14.00 inches)

Loading Print Media in the Standard and Optional Trays

NOTE:

To avoid paper jams, do not remove the tray while a printing is in progress.

NOTE:

Use only laser print media. Do not use ink jet paper in this printer.

All trays are loaded the same way.

1. Pull the tray out of the printer until it stops. Hold the tray with both hands, lift the front slightly, and remove it

from the printer.