Dell 3130cn Color Laser Printer - Manual (Page 145)

Black Prints in the black and white mode.
Color* Prints in the color mode.
PostScript
Use the PostScript menu to change printer settings that only affect jobs using the PostScript emulation printer language.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
PS Error Report
Purpose:
To specify whether the printer outputs error contents for a PostScript error. The change becomes effective after the
printer is turned off and then on again.
Values:
On* Prints an error message before it discards the job.
Off Discards the print job without printing an error message.
NOTE: This instructions from the PS driver override the settings specified on the operator panel.
PS Job Time-Out
Purpose:
To specify the execution time for one PostScript job. The change becomes effective after the printer is turned off and then
on again.
Values:
Off* Job timeout does not occur.
1-900min. A PostScript error occurs if processing is not completed after the specified time.
Init PS Disk
Purpose:
To initialize the PostScript file system on the optional hard disk.
NOTE: The Init PS Disk menu is only displayed when an optional hard disk is installed on your printer.
PaperSelectMode
Purpose:
To specify the way to select the tray for PostScript mode. The change becomes effective after the printer is turned off and
then on again.
Values:
Auto* The tray is selected as the same setting as in the PCL mode.
Select FromTray The tray is selected in a method compatible with regular Post Script printers.
Default Color