Dell 3130cn Color Laser Printer - Manual (Page 119)

with minimum warm-up time. Select a value between 5 and 60 minutes for the power saver timer mode if you want a
balance between energy consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver timer mode when it receives data from the
computer. You can also return the printer to the standby mode by pressing any button on the operator panel.
*2 This item is only available when the optional 550 sheet feeder is installed.
*3 This item is only available when the 512 MB, or higher, optional memory is installed, and also when the optional
hard disk is not installed.
*4 Only displayed when the optional 512 MB memory is installed.
*5 Only displayed when the optional 1024 MB memory is installed.
*6 The factory default setting of mm/inch is set to inch(") in the United States.
Paper Density
Purpose:
To specify the paper density settings.
Values:
Plain
Normal*
Specifies plain paper density settings.
Light
Label
Normal*
Specifies label paper density settings.
Light
Apply New Settings
After you complete the settings, press the Apply New Settings button to apply
the changes.
Restart printer to apply new
settings
Press the Restart printer to apply new settings button to apply the changes.
Registration Adjustment
Purpose:
To set Color Registration Adjustment (individual yellow, magenta, cyan correction) settings. When Auto Registration
Adjustment is set to On, the printer prints the color registration chart and to adjust the color registration by using the
chart. This function is required after the printer is set up or moved.
Values:
Auto
Registration
Adjustment
Off Does not perform color registration automatically.
On* Performs color registration automatically.
Auto Correct Click Start to perform color registration automatically.
Color Regi Chart Click Start to print a color registration chart.
Enter Number
Yellow
-
9-
+9
Specifies lateral (perpendicular to paper feed direction) color adjustment values that
are found in the color registration chart individually for Yellow, Magenta, and Cyan.
0*
Magenta
-
9-
+9
0*
Cyan
-
9-
+9