Dell 3130cn Color Laser Printer User Manual
Page 133
Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer ready to operate
with minimum warm-up time. Select a value between 5 and 60 minutes for power save mode if you want a balance
between energy consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver mode when it receives data from the
computer or remote fax printer. You can also return the printer to the standby mode by pressing any button on the
operator panel.
Audio Tones
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message appears.
Values:
Control
Panel
Off* Does not emit a tone when the operator panel input is correct.
On
Emits a tone when the operator panel input is correct.
Invalid Key
Off* Does not emit a tone when the operator panel input is incorrect.
On
Emits a tone when the operator panel input is incorrect.
Machine
Ready
Off* Does not emit a tone when the printer becomes ready.
On
Emits a tone when the printer becomes ready.
Job
Completed
Off* Does not emit a tone when a job is complete.
On
Emits a tone when a job is complete.
Fault Tone
Off* Does not emit a tone when a job ends abnormally.
On
Emits a tone when a job ends abnormally.
Alert Tone
Off* Does not emit a tone when a problem occurs.
On
Emits a tone when a problem occurs.
Out of Paper
Off* Does not emit a tone when the printer runs out of paper.
On
Emits a tone when the printer runs out of paper.
Low Toner
Alert
Off* Does not emit a tone when toner or some other consumable is low.
On
Emits a tone when toner or some other consumable is low.
Base Tone
Off* Does not emit a tone when the operator panel display is returned to the default settings by
scrolling the loop menu.
On
Emits a tone when the operator panel display is returned to the default settings by scrolling the
loop menu.
Fault Time-Out
Purpose:
Specifies in seconds the amount of time the printer should cancel for a job stops abnormally. The print job is cancelled if
the time-out time is exceeded.
Values:
60 sec.*
Specifies the amount of time the printer cancels for a job stops abnormally.
3-300 sec.
Off
Disables the fault timeout.
Time-Out
Purpose: