Using the print and hold function, Printing and deleting held jobs, Printing held and proof print jobs – Dell 3130cn Color Laser Printer User Manual
Page 157: Stored print, When using the operator panel
Select PS Fonts List to print a listing of the fonts available to the PostScript
®
3™.
4. Press
(Set) button.
The message PCL Fonts List Printing or PS Fonts List Printing appears and remains on the operator panel until
the page prints. The printer returns to the Ready to Print state after the font sample list prints.
Using the Print and Hold Function
When you send a job to the printer, you can specify in the driver that you want the printer to hold the job in memory.
When you are ready to print the job, you must go to the printer and use the operator panel menus to identify which job in
the memory or hard disk you want to print. You can use this function to print a confidential job (Secure Print), or verify
one copy before printing additional copies (Proof Print).
NOTE:
The printer holds the job until you delete it by using the operator panel or you turn off the printer. The data
on memory is cleared when the printer is turned off. The data on the optional hard disk is not cleared even when
the printer is turned off.
NOTE:
Print and Hold functions require a minimum of 512 MB available printer memory or hard disk. Also, you need
to configure the RAM disk settings on the operator panel and the printer driver.
NOTE:
Depending on the documents, its job may be too big for the available memory. In this case, an error occurs.
NOTE:
If a document name is not assigned to your print job in the printer driver, the job's name will be identified
using the PC's time and date of submission to distinguish it from other jobs you have stored under your name.
Printing and Deleting Held Jobs
Once held jobs are stored in print memory or hard disk, you can use the operator panel to specify what you want to do
with one or more of the jobs. You can select either Secure Print or Proof Print from "
". Then, you select
your user name from a list. If you select Secure Print, you must type the password you specified in the driver when you
sent the job. See "
" for more information.
From either the Secure Print or Proof Print menu items, you have three choices:
Print and Save
Del after Print
Delete
NOTE:
To send a job to print as Secure Printing or Proof Printing, select Secure Print or Proof Print in Job Type
in the Paper/Output tab of the Printing Preferences dialog box.
Printing Held and Proof Print Jobs
When Using the Operator Panel
1. Press Menu button.
2. Press
button until Report/List appears, and then press
(Set) button.
3. Press
button until either Stored Document appears, and then press
(Set) button.
The stored documents page is printed.
Stored Print